Focus ST225 owners get ready the VTF420R stage 4 Hybrid turbo has landed. We felt it was time to shout about the software and hardware we have available for the Focus ST225 and MK2 RS. With 420+HP on tap at low boost pressure's this turbo is a force to be reckoned with!
Stage 2+ / Stage 3 (up to 340 hp) A stage 2+ (sometimes referred to as stage 3) mk2 Focus ST will see between 320 and 340 hp. It involves the installation of larger 440 cc fuel injectors, the Turbosmart or Forge wastegate actuator along with the usual bolt-on modifications for stage 2. Required Mods. Same mods as those from stage 2
The DAZA DS1 AUDI RS3 product comes after the roaring success of our 4.0T product. We have incorporated all the same features except we do not have OTS maps beyond stage 2. So we have things like real flex fuel with a sensor, displays of things like ethanol content, full range boost, knock and fuel pressures on the virtual cockpit power and torque gauges, 10 way map switching with custom
Focus st225 , stage 2 airtec intercooler, mongoose cat back , airtec decat , Car was driving fine , serviced it with new bosch plugs . Now has misfire P0300 P0301 P0302 P0303 So far I have changed following 3 sets of new plugs 2 bosch 1 iridium Coil bosch pack tried on all cyls Map sensor Boost valve Compression test 150psi on all Swapped injectors
Our tuning packages for the focus ST can go in in excess of 400BHP. Our three basic stages of tune are listed below: Stage 1, This package lifts the power restrictions from within the ECU and enhances the power output. The package is a drive in drive out package, and consists of the following: Full engine management diagnostics check.
. 198 140 114 152 158 61 233 303 91
focus st225 stage 2 requirements
